Creating a Trace

The Trace utility is a diagnostic tool for troubleshooting host communications and connectivity problems. With this utility you can trace activity within host software or other standardized components linked to OnWeb Web-to-Host. This section describes how to use the Trace utility to get a binary trace that can be sent to Micro Focus Technical Support for additional help troubleshooting your problems.

Pro uses the Rumba+ Desktop Trace Trace utility that comes with Rumba+ as standard. If Rumba+ is installed, use its trace utility.

If Rumba+ is not installed, you can download the Trace utility from the server hosting Web-to-Host. Type the following URL into the address bar of any Web browser.

http://<servername>/w2hlegacy/utils/installrumbatrace.msi

Important: Before starting the procedure, close all applications. If you are using Rumba+, ensure it is closed.

To take a correct binary trace:

  1. If Rumba+ is installed, select Start > All Programs > Micro Focus Rumba+ Desktop > Rumba+ Desktop Tools > Rumba+ Desktop Trace. Otherwise, select Start > All Programs > RUMBA Trace > RUMBA Trace.
  2. On the menu bar, select Options > Configuration.
  3. On the API Selection page, click Select All. After all entries have been selected, click Reset All.
  4. On the Output page, in the Formatted Output section, select Display.
  5. In the Binary Output section select Binary File. The box next to the option becomes available.
  6. Enter the full path for the binary file being created (or browse to it). or example, you might assign the file the call log number, c368758.bin. All file names should end with the extension .bin.
  7. Click OK.
  8. Minimize the Rumba+ Desktop Trace window that appears.
  9. Run the Rumba+ application that is causing the problem as you normally would, starting from the connection (for example, Rumba+ display, or printer). Let the program run until the problem appears (error message, session hanging, or any other problem).
  10. Log off and disconnect from the host.
  11. Maximize the Rumba+ Desktop Trace window, then select File > Exit.
  12. Send the .bin file you created by email to Micro Focus Technical Support.