MAR OCT Nov 4 2008 2009 2010 4 captures 4 Oct 07 - 4 Oct 09

Close Help

Installing VisiBroker on SuSE Linux 9 (x86_64)

This document describes procedures for installing VisiBroker on Installing VisiBroker on SuSE Linux 9 (x86_64) operating system.

You can download VisiBroker from http://www.borland.com/downloads/download_visibroker.html

Note:

Preparing for installation

Before installing on SuSE Linux you should:

• check platform and system requirements
• check JDK requirements

Platform and system requirements

Before installing VisiBroker on SuSE Linux, check the latest platform information and system requirements .

JDK requirements

The installation package for SuSE ships JDK 1.5. Currently, both IBM and SUN provide JDK for 64-bit platforms.

For information on platform support for JDK from Sun, go to Java Platform, Standard Edition .
For information on Java products for IBM as well as the system requirements for installation of the JDK, go to http://www.ibm.com/developerworks/java/jdk .

Important: Before installing on SuSE, you must have an existing JDK installed. Make sure to put the JDK 1.4.2 or JDK 1.5 bin directory into the path variable.

To check the location of your JDK and the version, use the following syntax:

$which java
/opt/local/bin/java
$java -version
java version "1.4.2"

Installing VisiBroker on SuSE Linux

You can install VisiBroker from http://www.borland.com/downloads/download_visibroker.html

Before you install VisiBroker, select the installation method:

• If you want to download a version of the product from the Borland web site, go to the web site mentioned above.
• If you want to perform a silent installation using definitions from a properties file, see Invoking silent installation.

1. Invoke the following command to launch the installer.

    java -cp vb7-<release number>-linux-suse-x64.jar install 

   For most options, defaults offered by the installation wizard are acceptable. You can use the Previous button to return to earlier screens and change any information that is incorrect.

Note: If you select the default, you may have to manually add certain components to your environment path. If you choose the Custom install type to add the VisiBroker environment variables, the installation sets the BES_LIC_DIR to <install_dir>/var and BES_LIC_DEFAULT_DIR to <install_dir>/license.

Note: You can register and activate your license later, either by running the lmadm executable found in the <install_dir>/bin directory.

On some hosts, license registration wizard (lmadm) might take a long time to start during installation. This behavior is specifically observed when the system is configured to use IPv6 stack. The connection attempts can be slow if the machine's configurations or network settings are incorrect. To resolve this, you must skip the license registration phase during installation and perform licence registration separately after the installation.

Note:

When VisiBroker is installed in NFS mounted directories and if there is insufficient disk space for the system temp directory, post installation cleanup process may not remove all the temporary files as the NFS server periodically locks files in the directories. To resolve this, you must manually clean the temp directories/files after installation.

Install log

The installer generates an install log that is written to the folder where the installer file resides if you used a downloaded file to install VisiBroker.

The VisiBroker install log file is:

<install_dir>/Borland_VisiBroker_InstallLog.xml

The file is an XML formatted log with installation-specific information, such as errors.

Running the installer without a GUI

The installer is capable of running in a text only mode for UNIX systems. You can invoke the installer with a parameter which specifies the UI mode.

To run the installer in text-only mode:

1. Change directories to the folder where the installation executable file is and enter the following command:

    java -cp <install_file>.jar install -i console 

2. When the installer launches, follow the onscreen installation panels.

   The installer will write to stdout and read from stdin. This allows you to telnet from one system to another and run the installer remotely.

Configuring VisiBroker for C++ server, VisiTransact, or VisiNotify license variables

Before running VisiBroker C++ server, VisiTransact, or VisiNotify, you need to set two license environment variables (BES_LIC_DIR and BES_LIC_DEFAULT_DIR). During installation, a shell script is created for you to use for setting these environment variables.

To set the variables:

1. Open a command window.
2. Change directory to <install dir>/bin.
3. Determine the appropriate script for your shell.

   If you are using the Korn or Bourne shell, use the following script to set environment variables:

   vbroker.sh

   If you are using the C shell, use the following script to set environment variables:

   vbroker.csh

4. To run the script automatically when you log in, add a command to your .profile, .cshrc, or .login file.

Using silent installation

Before invoking the silent installation process, you must first create a text file that contains the properties for configuration settings, such as install directory, server name and JDK home. Each property must be listed on its own line, terminated by a carriage return, with no blank spaces at the end of each line and no blank lines at the end of the file. See the Properties file for silent installation section for more information.

After creating the text properties file, save it as <propertiesfile>.txt, where <propertiesfile> is the filename prefix for your properties file. Now you can invoke the silent installation process using the values specified in the properties file(s).

Note: All properties and values are case-sensitive. When specifying directory and file paths, always use a forward slash.

Properties file for silent installation

The properties file is a plain text file, with each property listed on its own line, terminated by a carriage return, with no blank spaces at the end of each line and no blank lines at the end of the file. The properties can appear in any order in the file.

Properties File Contents for Silent Installation

Sample silent installation properties for VisiBroker

This example installs VisiBroker Edition on agent ports, and installs several VisiBroker Extended Services.

 INSTALLER_UI=silent
 USER_INSTALL_DIR=/opt/Borland/VisiBroker
 USER_SHORTCUTS=/dev/null
 OSAGENT_PORT=14925
 INSTALL_TYPE=VisiBroker
 VISI_SERVICES=VisiNotify,VisiSecure,VisiTime,VisiTransact,VisiTelcoLog
 

Invoking silent installation

To invoke the silent installation process using the values specified in the properties file:

1. Open a command-line shell.
2. Download VisiBroker for SuSE Linux from the Borland web site.
3. Go to the directory where you downloaded the installer and give it all permissions, or chmod 777 <installer file>, where 777 indicates all, to run the installer.
4. Invoke the silent installation process by entering the following command. Make sure to specify the full path name of the <propertiesfile> file:

   java -cp <installer file>.jar install -f <path to properties file>

Note: After silent installation is completed, you need to register and activate the license you received for your product. The license may be in the form of an email from Borland listing one or more serial numbers and license keys, or it may be a license key file sent to you in an email from Borland. You can also register and activate your license by running the lmadm executable found in the <install_dir>/bin directory.

Licensing and Registration

Before using VisiBroker, you need to register and activate the license you received for your product. The license may be in the form of an email from Borland listing one or more serial numbers and license keys, or it may be a license key file sent to you in an email from Borland.

If you have a valid, node-locked license for previous version of the VisiBroker installed on the same machine as the newly-installed VisiBroker, use the lmadm command-line tool to migrate your previous license for use with the newly-installed VisiBroker software.

If you have already received a key file in an email from Borland for a product you purchased online or downloaded for evaluation, or if you downloaded a free version of the product, you can use the registration wizard to apply the key file, or you can copy it to the <install_dir>/license directory and it will be applied automatically when you restart your product.

If you have a serial number and key, you can register and activate your VisiBroker product using one of the following registration methods:

• Direct. If your system is connected to the Internet, this is the simplest method. The product registration wizard guides you through all required steps and automatically activates your license for you. For more information, see the Direct registration section.
• Email. You send your registration request via your own email account (from any system), and will receive an activation file via email that you can apply to your installation. For more information, see the Email registration section.
• Web page. Similar to email, except you register by visiting the Borland web site. For more information, see the Web page registration section.
• Telephone. You provide information to a Borland representative, who will send you an activation file by email or mail. For more information, see the Telephone registration section.

Depending on which method you choose, you may be asked to indicate whether you have a Borland Developer Network (BDN) account. If you do not have an account, you will be prompted to create one in the product registration wizard.

If you do not choose the Direct registration method, you will receive an activation file. Simply copy this file into the <install_dir>/license directory and it will be applied automatically when you start your product.

Direct registration

To use the Borland product registration wizard for Direct registration:

1. Select the Direct registration method in the first wizard screen, and click Next.
2. Indicate whether you have a BDN account, and click Next. If you do not have an account you are prompted to create one in this wizard.
3. If applicable, enter proxy settings for your internet connection.
4. Review the summarized information before clicking Next. The wizard monitors and displays the progress of your registration.
5. When registration is successfully completed, click Next. Then click Finish to close the Wizard.

Email registration

To use the Borland product registration wizard for Email registration:

1. In the first wizard screen, select the Email registration method and click Next.
2. Indicate whether you have a BDN account, and click Next. If you do not have an account you are prompted to create one in this wizard.
3. Review the summarized information before clicking Next.
4. Copy the content of the Email Registration content pane into an email message addressed to reg@borland.com, and click Next.
5. To close the Wizard, click Finish. You will receive a product activation file by email.
6. Copy the activation file into the <install_dir>/license directory, and it will be applied automatically when you start your product.

Web page registration

To use the Borland product registration wizard for Web page registration:

1. In the first wizard screen, select the Web page registration method and click Next.
2. Copy the registration key from the Web Registration step of the wizard, then click Finish to close the Wizard.
3. Start a web browser and open the http://reg.borland.com URL.
4. In the registration web page, enter your BDN account information and click Login. If you do not have an account, click the Create account link (http://reg.borland.com/srs5/new_user.jsp).
5. In the Product Registration web page, enter the Serial Number and the Registration Key (from the registration wizard) and click Continue.
6. Verify the email address to which the activation file will be sent, and click Register. You will receive a product activation file by email.
7. Copy the activation file into the <install_dir>/license directory, and it will be applied automatically when you start your product.

Telephone registration

To use the Borland product registration wizard for Telephone registration:

1. In the first wizard screen, select the Telephone registration method and click Next.
2. From the drop-down list, select the location that is nearest you.
3. Click Next, then click Finish to close the Wizard.
4. Dial the number for assistance by telephone and keep the information in the Phone Registration wizard screen on hand.
5. When you receive your activation file, copy it into the <install_dir>/license directory, and it will be applied automatically when you start your product.

Uninstalling VisiBroker

To uninstall VisiBroker:

1. Make sure there are no background processes (such as osagent) running during the uninstall.
2. Change directories to <install_root>/UninstallerData directory.
3. If you are installing using a web download, enter the command:

   java -cp uninstaller.jar uninstall

4. After you run the uninstall command, check the installation directory and remove any unnecessary files and subdirectories.