HPS1000-HPS1099
HPS1000E * Error * No parm field supplied on EXECute statement
Explanation: The program HPSGLOBE must have a parm value. These values are documented In the ChangeMan SSM Installation Guide.
Solution: Provide the PARM value as documented in the ChangeMan SSM Installation Guide.
HPS1001E Unrecognized parm, Valid=GLOBAL
Explanation: The program HPSGLOBE was invoked with an invalid parm field.
Solution: Provide the PARM value as documented in the ChangeMan SSM Installation Guide.
HPS1002E Duplicate or mutually-exclusive parameters
Explanation: The parms supplied to the program HPSGLOBE are in conflict.
Solution: Provide the PARM value as documented in the ChangeMan SSM Installation Guide.
HPS1027I **** Global update **** 'Object'
Explanation: During the execution of HPSGLOBE (Global Event Tracking), the named Object was examined for new Events.
HPS1028W Capture failure. RC='code'
Explanation: During the execution of HPSGLOBE (Global Event Tracking), the capture process failed for the named Object. The program continues with the next object. The program return code is given.
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1030I AT ADMOPN
HPS1030W Object view failure. RC='code'
Explanation: During the execution of HPSGLOBE (Global Event Tracking), the data in the named Object was not retrieved successfully from the Object Master. The program return code is given.
Solution: Contact ChangeMan SSM Technical Support.
HPS1032I Global capture time stamp 'yy/mm/dd hh,mm,ss'
Explanation: This time stamp indicates when Global Event Tracking was begun for all tracked Objects in the software. The format is year/month/day hour, minute, second.
HPS1038W 'volser' VOLSER not online. Rename thru tracking is suspended.
Old object 'dsn'
New object 'dsn'
Explanation: Volume where the renamed data set resides is not online.
Solution: Bring the volume on-line. Next time HPSGLOBE runs, it will try the same function again.
HPS1039W New name not found on 'volser'. Rename thru tracking is suspended.
Old object 'dsn'
New object 'dsn'
Explanation: Volume where the new data set resides is not on-line.
Solution: Bring the volume on-line. Next time HPSGLOBE runs it will try the same function again.
HPS1040I AT BEFORE CLEAN
HPS1040W Renamed object still exists 'oldname'
Tracking thru rename is suspended for 'newname'
Explanation: Next time HPSGLOBE runs it will try the same function again.
HPS1041W Object renamed from, 'oldname'
To, 'newname'
Which is already defined to tracking. Rename through tracking is suspended.
Solution: Next time HPSGLOBE runs it will try the same function again.
HPS1042I 'number' objects defined.
Explanation: The number of data sets defined to the tracking is reported.
HPS1043I 'number' new events in 'number' clusters.
Global capture time stamp 'TIMESTAMP'.
Explanation: The number of new events detected is reported.
HPS1050I System Symbolic resolved.
Original: dsn with symbolic
Resolved: resolved dsn
HPS1051W Unable to resolve System Symbolic. RC=nn
...
HPS1100-HPS1199
HPS1101W Maintenance is required on OM 'object master cluster'
Object 'object name' exists for undefined group 'group'
'userid'
Explanation: ChangeMan SSM detected an inconsistent data structure for this object.
Solution: Run the JCL $MAINT in the "node.HPS.INSTALL" data set to correct the problem.
HPS1102E ** Get failure ** on 'acb'
file cluster 'cluster','macro form = '
'acb macro form' RPL OPTCD=('values')
R15 = 'rc' R0 = 'rc' FDBK = 'feedback code'
Key = 'basekey'
Solution: Contact ChangeMan SSM Technical Support.
HPS1103E ** Put failure ** on 'acb'
file cluster 'cluster','macro form'
'acb macro form' RPL OPTCD=('values')
R15 = 'rc' R0 = 'rc' FDBK = 'feedback code'
Key = 'basekey'
Solution: Contact ChangeMan SSM Technical Support.
HPS1104E ** Put failure ** on 'acb type'
file cluster 'cluster','macro form'
'acb macro form' RPL OPTCD=('values')
R15 = 'rc' R0 = 'rc' FDBK = 'feedback code'
Key = 'omkey'
Solution: Contact ChangeMan SSM Technical Support.
HPS1105E Append failed for OM 'object master cluster' R0 = ' '
Explanation: The Object Master could not be attached to the Site Master and initialized successfully. The Object Master must be an existing VSAM data set before it can be attached.
Solution: Use the sample $INIT JCL to define an Object Master. This JCL is provided in the INSTALL data set. Refer to the ChangeMan SSM Install Guide.
HPS1200-HPS1299
HPS1200I Output file successfully created
HPS1201E Input file is damaged
Explanation: The token data set, input for a redundancy report, is not a valid data set.
Solution: Check the file name or contact ChangeMan SSM Technical Support for assistance.
HPS1202E Open failure on input file
Solution: Contact ChangeMan SSM Technical Support.
HPS1203E Close failure on input file
Solution: Contact ChangeMan SSM Technical Support.
HPS1204E Open failure on output file
Solution: Contact ChangeMan SSM Technical Support.
HPS1205E Close failure on output file
Explanation: The output token data set did not close successfully.
Solution: Contact ChangeMan SSM Technical Support.
HPS1206E Input file is not sorted
Explanation: The token data set being input for redundancy is not sorted.
Solution: If the problem cannot be solved, contact ChangeMan SSM Technical Support.
HPS1300-HPS1399
HPS1300I EOF HPSIN, Cards read='count' with 'nn' commands.
Explanation: The message indicates the end-of-file status of the SYSIN data set for Batch Synchronization Facility.
HPS1301W Specified volume "volser" is not available.
Explanation: The volser you have entered is not available.
Solution: Verify volser selected is available; re-enter.
HPS1302I Volume "volser" selected.'
Explanation: The named volume was selected for processing.
HPS1303I Dsorg='dsorg' Recfm='recfm' Selected-DSN='data set name'
Explanation: The named data set was selected using a pattern specified.
HPS1304E Set group administrator mode failed. RC='rc'
Explanation: The userid of the job being submitted is not known to the tracking component as a group administrator.
Solution: Contact the Object Master Administrator (or the installer) to define this user as a Group Administrator.
HPS1305W Not authorized to update Department department
HPS1306E 'TSO user id' is not defined as a user.
Explanation: The TSO user id entered has not been defined in ChangeMan ZMF.
Solution: Enter a valid TSO user id defined in ChangeMan ZMF or contact ChangeMan SSM Technical Support.
HPS1307E 'TSO user id' is not defined as a user in this group.
Explanation: The userid of the job being submitted is not known as a user of the group specified.
Solution: Contact the Group Administrator or the installer.
HPS1308I Defined to the group. Object, 'object name'
Explanation: The object is successfully defined for tracking.
HPS1309I Already defined to the group. Object, 'dsn'
Explanation: The object being defined has already been defined in this group or another group. A connection to this group is now established.
HPS1310W HPSTRACK Add object failed: RC= 'rc', R0= 'value'
Object: 'dsn'
See previous message for the cause of this failure.
Explanation: Definition of the object by ChangeMan SSM failed. The return code is displayed in RC=.
-
For return code 25, an HPS0104E message will also be displayed and provides additional information.
-
For return codes 05, 06, or 07, see the previous message in the log for the reason for failure.
-
Return code 130 means that SSM was unable to locate the data set through the catalog. It could be that it is an uncataloged data set that requires a VOLSER; or the catalog entry could be invalid.
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1311E Group does not exist or you are not defined as a user in the group.
Solution: Contact the Group Administrator first to define you as a user of this group. If unable to resolve the problem, contact ChangeMan SSM Technical Support.
HPS1312E Set user mode failed. RC='rc'
Explanation: This is probably an internal error.
Solution: Contact ChangeMan SSM Technical Support.
HPS1312W Object definition set to SIMULATE (list-only) mode.
Explanation: Warning, this process is set to simulate only.
HPS1313W Group "name" is not unique for user "tso userid"
Specify: ADMIN="group admin"
Solution: Group must be uniquely identified, accomplished by concatenating the Group Admin and Group name (ADMIN+GROUP).
HPS1314E "tso userid" is not in any group of "group name"
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1315W Capture failure. RC='rc', - object, 'object name'
Explanation: Capture function failed.
Solution: Contact ChangeMan SSM Technical Support.
HPS1316W View failure. RC='rc' - object, 'object name'
Explanation: View function failed.
Solution: Contact ChangeMan SSM Technical Support.
HPS1317I Summary of group= 'group name' Admin='admin'
nr objects selected.
nr objects not selected.
nr total objects in group.
nr new events detected in selected objects.
HPS1318I Summary of group= 'group name' Admin='admin'
nr objects selected.
nr objects not selected.
nr total objects in group.
nr new events detected in selected objects.
Cumulated events by selectable type and category: 'statistics for each type follows'.
HPS1319I 'nr' selected events in report.
HPS1320E Delta Master could not be used.
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1321E Delta Master has no backup under token.
Solution: Contact ChangeMan SSM Technical Support.
HPS1321W No matching Department Group found. Department group: 'name'.
Explanation: There are no department groups matching your entry.
Solution: Verify the name of the department group entered. Correct and reenter.
HPS1322E Object, 'object name' is not in group 'group name'
Solution: Specify the correct group name and resubmit the job. If this does not resolve the problem, contact ChangeMan SSM Technical Support.
HPS1323E Object, 'object name' is not defined for delta tracking
Solution: Contact ChangeMan SSM Technical Support.
HPS1324E Search time
Backup event time was before tracking was defined.
Explanation: This may be the result of SECONDS or MINUTES not having been included. The time stamp specified is probably wrong.
Solution: Correct the time stamp and submit the job again.
HPS1325E Dscb1 does not exist for pds 'dsn' on volume 'volser'
Explanation: The data set to be recovered is not specified correctly.
Solution: Correct the error and submit the job again.
HPS1326E No backup exists for this member.
Explanation: The requested member does not have any backup in the Delta Master.
Solution: Correct the error and submit the job again.
HPS1327W Request to recover current version is unnecessary
Explanation: User has requested a version from Delta Master. A member with an identical token already exists in the target data set.
Solution: Check the version number you have requested.
HPS1328T XHOBJECT = 'xhobject'
XGGRPNAM = 'xggrpnam'
XGCONUID = 'xgconuid'
DDNAME = 'ddname'
DSN = 'dsn'
DATETIME = 'datetime'
OLDMEMNA = 'oldmemna'
NEWMEMNA = 'newmemna'
RECVOLSR = 'recvolsr'
Explanation: This is a trace (or logging) message.
HPS1329E Expansion failed rc= 'rc'
Solution: Contact ChangeMan SSM Technical Support.
HPS1330I No new DSNs tracked using the generic pattern 'pattern'
'nr' were previously defined.
'nr' have been archived or migrated.
Explanation: An DEFINEDS was initiated; however, no new data sets were defined. They are all defined already.
HPS1331E View failure of object 'object' with RC= 'rc'
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1332E Set Primary administrator mode failed. RC='rc'
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1333E Set OM administrator mode failed. RC=',(R15)
Explanation: An attempt to set the OM administrator mode was not successful; if the return code = 5, then the number of users or administrators specified may be insufficient.
Solution: If the return code = 5, increase the number of users or administrators.
HPS1334I OMATTACH function successful.
HPS1335W OMATTACH 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1336I GRPADMADD - Group Administrator added: 'userid'
HPS1337W GRPADMADD 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: If the reason cannot be determined, contact ChangeMan SSM Technical Support.
HPS1338I GRPADD - Group added: 'AdminID.Group'
HPS1339W GRPADD 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1340I GRPUPD - Group updated: 'AdminID.Group'
HPS1341W GRPUPD 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
To determine the cause of the error, view the contents of R15:
R15=0 Normal
R15=4 The record did not previously exist
R15=8 Function Disallowed
R15=17,18,19 Put Failure to Object Master
R15=20 Setting the Group Failed
R15=21 Adding the User Failed
Solution: Correct the error and resubmit. If you cannot determine the cause of the problem, contact SSM Technical Support.
HPS1342I GRPDEL - Group deleted: 'AdminID.Group'
HPS1343W GRPDEL 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1344I User 'userid' revoked from group 'group name'
HPS1345I User 'userid' name updated in group 'group name'
HPS1345W Revoke user: 'userid' from group 'group name' 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1346I Update user name: 'userid' in group 'group name' RC='rc'
HPS1347W Update user name: 'userid' in group 'group name' 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1348I User 'userid' authorized to group 'group name'
HPS1349W Authorize user: 'userid' to group 'group name' 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1350I Object 'object' deleted from group 'group name'
HPS1351W Delete object: 'dsn' from group 'group name' 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1352W Set Group function, group not found. RC='rc'
Explanation: The Set Group function failed. For RC=05, either the group was not found, or the submitter is not an administrator for this group.
Solution: Correct the error and resubmit.
HPS1353I OMMODIFY function successful.
HPS1354W OMMODIFY 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1355I OMDETACH function successful.
HPS1356W OMDETACH 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1357I GRPADMUPD function successful.
HPS1358W GRPADMUPD 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1359I GRPADMDEL function successful.
HPS1360W GRPADMDEL 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1361I OMADMADD function successful.
HPS1362W OMADMADD 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1363I OMADMUPD function successful.
HPS1364W OMADMUPD 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Correct the error and resubmit.
HPS1365I OMADMDEL function successful.
HPS1366W OMADMDEL 'reason' RC='rc'
Explanation: The reason field contains an explanation of the return code in the RC= field.
Solution: Contact ChangeMan SSM Technical Support.
HPS1367E Not authorized to update Group 'name'.
Solution: Contact ChangeMan SSM Technical Support.
HPS1367W Rejected 'dsn' Cataloged to volume 'volser'
Solution: Contact ChangeMan SSM Technical Support.
HPS1368I Successful restore of dsn : 'dsn'
HPS1369W Failure in restore of dsn : 'dsn'
Solution: Contact ChangeMan SSM Technical Support.
HPS1370I Object Master: 'cluster' Owner name : 'name' Created : 'date'
HPS1371W Group 'GRPUID,GRPNAME' already exists.
HPS1372W Entity already exists. Define rc=n Member='member name' DSN='data set name'
HPS1373W Entity define failure. Member='member name' DSN='data set name'
HPS1374I Entity successfully defined to MLS Member='member name' DSN='data set name'
...
HPS1375W Entity does not exist. Delete rc=4 Member='member name' DSN='data set name'
...
HPS1376W Entity delete failure. Member='member name' DSN='data set name'
...
HPS1377I Entity successfully deleted from MLS Member='member name' DSN='data set name'
...
HPS1378I History file on DD = 'DD name' DSN = 'data set name'
HPS1379I 'nn' event records written
HPS1380W MRT dsn-member pattern 'pattern' is already present.
Explanation: The MRT dsn-member inclusion pattern specified in the MRTDEF command already exists in the MRT list.
Solution: Correct the error and resubmit your request.
...
HPS1381I MRT dsn-member pattern 'pattern' added.
HPS1382W MRT dsn-member pattern 'pattern' is not present.
Explanation: The MRT dsn-member inclusion pattern specified in the MRTDEL command was not found in the MRT list. The dsn (and member) pattern supplied must match the existing entry exactly - including asterisks.
Solution: Correct the error and resubmit your request.
HPS1383I MRT dsn-member pattern 'pattern' deleted.
HPS1384E Standard Compression-Expansion table define failure. C='rc' 'name'.
Explanation: An error occurred defining the compression/expansion table, possibly a data set has been migrated or not found.
Solution: Contact ChangeMan SSM Technical Support.
HPS1384I Standard Compression-Expansion table defined: 'name'.
HPS1385W No new DSNs tracked from specified parameters.
Explanation: HPSTRACK did not find any additional objects to track.
HPS1386W No backup standard tables have been defined.
HPS1387I No IDV data sets have been defined, This list represents names of defined tables:'table name'.
Explanation: Information displaying a list of defined tables; this list will not have any IDV data sets.
HPS1388W Version 'number' of member 'member' not found.
HPS1389W No backups found for object: 'object'.
HPS1390E Invalid event length of zero at 'address'.
Explanation: An invalid event was found in the event history record.
Solution: HPSINTEG should be run to correct any errors in the Site Master file.
HPS1391I Delete of Backup completed. RC='rc'.
HPS1392W No data set name matched generic pattern ',GENPTTRN
HPS1393I 'type comment' completed successfully. DSN: 'dsn' Member: 'member' Stamp: 'timestamp'
HPS1393W 'type comment' completed successfully.
DSN: 'dsn'
Member: 'member'
Stamp: 'timestamp'
HPS1394W No event found for Stamp: yyyy/mm/dd_hh:mm:ss. DSN: 'dsn' ('volser').
HPS1395W 'No History found for Object: 'object'.
HPS1396W Not a PDS. Object: 'object'.
Explanation: Warning, a member history report is requested for a data set that is not a pds (and has no members).
HPS1397W No events found for Member 'member', Object: 'object'.
HPS1398E ADMIN+GROUP combination does not exist.
Explanation: Make sure the ADMIN and GROUP are both specified properly. The combination identifies a group.
Solution: Run the SHOWOM job to see the defined groups in your data base. If unable to resolve the problem, contact ChangeMan SSM Technical Support.
HPS1399E Error adding Alternate Group Admin, RC='rc'.
Explanation: A put failure occurred while attempting to write the B30 (alternate administrator) record.
Solution: Check the prior HPS0104E message for the reason for the failure.
...
HPS1399I Alternate Admin added successfully.
...
HPS1399W Duplicate Group Alternate Admin.
...
HPS1400-HPS1499
HPS1400E Error deleting Alternate Group Admin, RC='rc'.
Explanation: An error occurred while attempting to delete a B (alternate administrator) record.
Solution: Check the prior HPS0104E message for the reason for the failure.
HPS1400I Alternate Admin deleted successfully.
HPS1400W Alternate Group Admin not found.
HPS1401I Alternate Admin updated successfully.
HPS1401W Alternate Group Admin not found.
HPS1403W Begin TTR not found 'cchhr' member 'name' of dsn 'name'
Explanation: Integrity of the named member needs to be confirmed.
HPS1404W CCHHR 'value' of dsn 'dsn' has an invalid segment length.
Explanation: The integrity of the data set needs to be confirmed.
Solution: Contact ChangeMan SSM Technical Support.
HPS1405W Object may be damaged: 'object name' Run HPSINTEG to verify object integrity.
Explanation: An inconsistency was detected when reading events for this object.
Solution: Back up the Site, Object, and Delta master files, and then run HPSINTEG to correct any errors.
HPS1406W CCHHR 'value' of dsn 'dsn' has an lrecl 'value' and a block length 'value'
Explanation: The integrity of the data set needs to be confirmed.
Solution: Contact ChangeMan SSM Technical Support.
HPS1407W CCHHR 'value' of dsn 'dsn' has a blk-descriptor of 'value'
Explanation: The integrity of the data set needs to be confirmed.
Solution: Contact ChangeMan SSM Technical Support.
HPS1408W CCHHR 'value' of dsn 'dsn' has an RDW descriptor of 'value'
Explanation: The integrity of the data set needs to be confirmed.
Solution: Contact ChangeMan SSM Technical Support.
HPS1410I MOVEOBJ * successful * , RC=0.
From: 'department/group' To: 'department/group'
Object: 'object name'
HPS1411W MOVEOBJ 'reason for failure' RC='nn'.
From: 'department/group' To: 'department/group'
Object: 'object name'
Explanation: Return codes and reasons:
05 - From group not found
06 - To group not found
07 - Object not found
HPS1417E Delta Master open failure. Cluster= 'Delta Master Cluster'
Explanation: Delta Master failed to open.
Solution: Contact ChangeMan SSM Technical Support.
HPS1418T Delta Master: “cluster name” -added-key: "value"
Explanation: This is a trace (or logging) message.
HPS1419T Delta Master: "cluster name" updated key: "value"
Explanation: This is a trace (or logging) message.
HPS1420T Cluster: "cluster name" duplicate key: “value”. Retrying operation.
Explanation: This is a trace (or logging) message.
HPS1470W MRE dsn-member pattern 'pattern' is already present.
Explanation: The MRT dsn-member exclusion pattern specified in the MREDEF command already exists in the MRE list.
Solution: Correct the error and resubmit your request.
HPS1471I MRE dsn-member pattern 'pattern' added.
HPS1472W MRE dsn-member pattern 'pattern' is not present.
Explanation: The MRT dsn-member exclusion pattern specified in the MREDEL command was not found in the MRE list. The dsn (and member) pattern supplied must match the existing entry exactly - including asterisks.
Solution: Correct the error and resubmit your request.
HPS1473I MRE dsn-member pattern 'pattern' deleted.
HPS1480W MRX member pattern 'pattern' is already present.
Explanation: The MRT global member exclusion pattern specified in the MRXDEF command already exists in the MRX list.
Solution: Correct the error and resubmit your request.
HPS1481I MRX member pattern 'pattern' added.
HPS1482W MRX member pattern 'pattern' is not present.
Explanation: The MRT global member exclusion pattern specified in the MRXDEL command was not found in the MRX list. The member pattern supplied must match the existing entry exactly - including any asterisk.
Solution: Correct the error and resubmit your request.
HPS1483I MRX dsn-member pattern 'pattern' deleted.
HPS1484I Multi-volume data set 'dsn' can not be defined using the VOL parameter.
Explanation: Correct and resubmit.