HPS1500-HPS1599

`HPS1500E Invalid input parm. Error type= 'rc'`

Solution: Correct the error and resubmit.

`HPS1501E Capture did not precede this recovery.'`

Solution: Contact ChangeMan SSM Technical Support.

`HPS1502E Backup event not found for object, 'object name'`

Solution: Correct the RECOVERY parameters and resubmit.

`HPS1503W XXXXXXX hh:mm:ss An alias is not recoverable or viewable because its base cannot be located.`

Alias: yyyyyyy Base: zzzzzzzz

Explanation: An alias is not recoverable or viewable, where:

XXXXXXX The name of the issuing program: HPSRBLD or HPSEXPAN

hh:mm:ss The time of the attempt to recover or view

yyyyyyyy The name of the alias member

zzzzzzzz The name of the base

Solution: Verify that the alias member name is correct.

`HPS1508I Deleted from group 'group name' Object: 'object'.`

Explanation: Object has been deleted from 'group name'.

`HPS1509W Not defined to group 'group name'. Object: 'object name'`

Explanation: The object is not defined to the group.

`HPS1510W Delete failure: RC='rc'. Object: 'object' from Group: 'group name'.`

Explanation: Delete object from group failed.

`HPS1598W XXXXXXX hh:mm:ss No new files tracked from specified parameters.`

0 were previously defined

Explanation: No new object name was specified or resolved; it could be that a pattern did not resolve to a filename or all files were already defined where:

XXXXXXX The name of the issuing program: HPSTRACK

hh:mm:ss The time of the attempt to define the new object name

Solution: Verify that the supplied file name or pattern is correct.

`HPS1599I XXXXXXX hh:mm:ss Summary of group=YYYYYY Department=ZZZZZZZZ.`

n objects selected.

n objects not selected.

n total objects in group.

n events detected in selected objects

Accumulated Events by selectable

type and category:

n Added

n Update

n Delete

n zFS

Explanation: This message displays the object events statistics for a specific group where:

XXXXXXX The name of the issuing program: HPSTRACK

hh:mm:ss The time of the attempt to define the new object name

YYYYYY The name of the group being summarized

ZZZZZZZZ The name of the department to which the group belongs

n The number of objects or events summarized, including zFS events

Solution: This is an informational message; no user action is required.

HPS1600-HPS1699

`HPS1600E 'dd' DDNAME is missing.`

Solution: Correct the error and resubmit.

`HPS1601E Open failure on DD 'dd'`

DSN 'dsn'

Solution: Correct the error and resubmit.

`HPS1603E VSAMBASE is not a VSAM Fingerprint data set.`

Not a keyed Fingerprint data set.

Not a Positional Fingerprint data set.

Solution: Correct the error and resubmit.

`HPS1604E Load modules and non-load modules cannot be compared.`

Solution: Correct the specification and resubmit.

`HPS1605E 'target' is not a VSAM fingerprint data set.`

Solution: Correct the error and resubmit.

`HPS1606E Targ Cluster is not compatible with Base Cluster.`

Solution: Correct the error and resubmit.

`HPS1607E Base VSfgp is empty: 'dsn'`

Solution: Correct the error and resubmit.

`HPS1608E Target VSfgp is empty: 'dsn'`

Solution: Correct the error and resubmit.

`HPS1609E Close failure on 'DD'`

Solution: Contact ChangeMan SSM Technical Support.

`HPS1610E Close failure on cluster 'cluster' was taken.`

Solution: Contact ChangeMan SSM Technical Support.

`HPS1611W Following KEY was added since Fingerprint was taken.`

Explanation: An add-regression was detected.

Solution: Determine the cause. To force it to continue, specify REGRESSIONCHECK=N.

`HPS1612W Following KEY was deleted since Fingerprint was taken.`

Explanation: A delete-regression was detected.

Solution: Determine the cause. To force it to continue specify REGRESSIONCHECK=N.

`HPS1613W Following KEY was added since Fingerprint was taken.`

Explanation: An update-regression was detected.

Solution: Determine the cause. To force it to continue, specify REGRESSIONCHECK=N.

`HPS1614E Selective Fingerprinting mismatches for Base and Targ.`

Explanation: When VSAM Selective Fingerprinting is in effect, both files must have been Fingerprinted with the same rules.

Solution: If you cannot resolve the problem, contact ChangeMan SSM Technical Support.

`HPS1615E nr "HPS1611W" ADD-regression msgs`

nr "HPS1612W" DELETE-regression msgs

nr "HPS1613W" UPDATE-regression msgs

Explanation: The scope of regression is indicated in this message. There is a potential user error of specifying the wrong target cluster.

Solution: Resolve the error and retry the job. Or, specify the parameter REGRESSIONCHECK=N to allow it to continue if it is acceptable.

`HPS1615I nr "HPS1611W" ADD-regression msgs`

nr "HPS1612W" DELETE-regression msgs

nr "HPS1613W" UPDATE-regression msgs

Explanation: The scope of regression is indicated in this message. There is a potential user error of specifying the wrong target cluster.

Solution: Resolve the error and retry the job. Or, specify the parameter REGRESSIONCHECK=N to allow it to continue if it is acceptable.

`HPS1616I Comparison Summary:`

ADD_CNT Dsects Inserted

DEL_CNT Dsects Deleted

UPD_CNT Dsects Updated

EQU_CNT Dsects Unchanged

HPS1616W **"rpl type" Failure** on:

File cluster" cluster"

MACRF = "value" RPL OPTCD-("code")

R15 = "code" RO="code" FDBK ="code"

Solution: Contact ChangeMan SSM Technical Support.

`HPS1617I Comparison Summary`

"nr" Added ¦ Inserted =>

"nr" Deleted <=

"nr" Updated <> or ""

"nr" Moved ~~

"nr" Unchanged ¦¦

`HPS1618I VSAM ¦ keyed Change Basket created:`

"nr" Add records

"nr" Delete records

"nr" Update records

"nr" Moved records

`HPS1619E No member name supplied for PDS: 'data set name'`

Solution: Supply the member name to be compared.

`HPS1620I REPORT CSECT option is turned off for PDSE objects.`

`HPS1621E DSN is not PO PS or DA: FILENAME`

Solution: Make sure you have specified the correct DSN.

`HPS1622E Invalid member name: MEMBER for a non-PDS: FILENAME`

Explanation: Make sure you specified the correct DSN.

`HPS1623E Member MEMBER not found in DSN: FILENAME`

Solution: Verify the correct DSN and MEMBER name.

`HPS1628E FGP File is damaged: 'dsn'`

Explanation: The FGP file appears to be damaged.

Solution: Verify that the FGP file was correctly created.

`HPS1671W DSN from FGP Header is uncataloged: DSN`

Explanation: Ensure that the named data set is a legitimate file.

Solution: If not, correct the JCL, and resubmit the job.

HPS1700-HPS1799

`HPS1700E Module HPSPARMS does not exist!`

Explanation: The specified HPSPARMS does not exist.

Solution: Specify an existing HPSPARMS.

`HPS1702E You are not the site administrator!`

Explanation: You must be the site administrator to perform this function.

Solution: Ask the site administrator to perform this function. If you are the site administrator, contact ChangeMan SSM Technical Support.

`HPS1703I Delta Master was not specified in the parms list. Delta maintenance is suspended.`

`HPS1704I Delta Master has vestige entry key 'key' Record is scheduled for removal.`

Explanation: There are backup versions that are not accounted for by any object or member. They are removed at end of the job.

`HPS1705I Delta Master key is damaged Record is scheduled for removal.`

Explanation: There are backup versions that are not accounted for by any object or member. They are removed at end of the job.

`HPS1706I Delta Master cluster is not initialized: Delta maintenance is suspended.`

`HPS1708T Delta Master backup token record 'key' is no longer referenced. Record is scheduled for removal.`

Explanation: This is a trace (or logging) message.

Solution: None. Record will be removed.

`HPS1709T Delta Master backup token record: key references a non-existent comp/exp key: value. Record is scheduled for removal.`

Explanation: This is a trace (or logging) message.

`HPS1710T Delta Master key "value" updated.`

Explanation: This is a trace (or logging) message.

`HPS1711T Delta Master key "value" erased.`

Explanation: This is a trace (or logging) message.

`HPS1712E Site Master cluster is not initialized!`

Explanation: The Site Master cluster must have been initialized during the installation. The HPSPARMx may indicate a Site Master that has never been initialized.

Solution: Correct the problem or contact ChangeMan SSM Technical Support.

`HPS1713E * Error * Site Master 1st record is invalid. Key of record is 'key' and length='len'`

Explanation: The first record in the Site Master is invalid.

Solution: Contact ChangeMan SSM Technical Support.

`HPS1714E Site Master and Object Masters require conversion. At least 'site master level' is required. Current version, 'version'`

Explanation: The level of the Site Master is not at the proper level required by the current version of the software.

Solution: Run the job to convert the Site Master and its associated Object Master.

`HPS1715I Site Master record length is invalid. Key of record is 'key' and length='length'. Record is scheduled for removal.`

Explanation: An invalid record was found in the Site Master. It will be erased.

`HPS1716I Site Master record references a non-existent OM. Key of record is 'key'. Record is scheduled for removal.`

Explanation: An invalid record was found in the Site Master. It will be erased.

`HPS1717I Volser = 'volser' Object = 'object'`

Explanation: The object (and its volser) is reported, as it is encountered.

`HPS1718I Delta='Y/N' Object='object'.`

Explanation: Information, delta has been selected or deselected for specified object.

`HPS1718T Site Master has vestige entry key "value" Record is scheduled for removal.`

Explanation: This is a trace (or logging) message.

`HPS1719T Site Master has invalid key "object name" Record is scheduled for removal.`

Explanation: This is a trace (or logging) message.

`HPS1720T Site Master has incomplete object "key" Record is scheduled for removal.`

Explanation: This is a trace (or logging) message.

`HPS1721T Site Master has incomplete object "key" sequences :begin" thru "end" Record(s) are scheduled for removal.`

Explanation: This is a trace (or logging) message.

`HPS1722I SUMMARY REPORT:`

nr Delta master records updated

nr Delta master records erased

nr Site master records updated

nr Files are being tracked

`HPS1723E Unrecognized execute parameter.`

Solution: Verify the execute parameters and resubmit the job.

`HPS1724E Duplicate execute parameter.`

Solution: Verify the execute parameters and resubmit the job.

`HPS1725E Valid formats: DDMMMCCCYY or DDMMMYY or CCYY/MM/DD or YY/MM/DD followed by _HH:MM:SS`

Solution: Specify the date using the correct format.

`HPS1726E Year must be greater than 1995 and less than 2096.`

Solution: Specify a year in the allowable range.

`HPS1726T Delta Master key ',DELT_KEY,' updated.`

Explanation: This is a trace (or logging) message.

`HPS1727E Month must be greater than zero and less than 13.`

Solution: Specify a valid month.

`HPS1727T Delta Master key ',DELT_KEY,' erased`

Explanation: This is a trace (or logging) message.

`HPS1728E Month is required.`

Solution: Specify a valid month.

`HPS1728T Site Master key 'BASEKEY' erased`

Explanation: This is a trace (or logging) message.

`HPS1729E Day-of-month is required.`

Solution: Specify a valid day of the month.

`HPS1729I Object 'object' removed.`

Explanation: Object has been memo-deleted.

`HPS1730E '/' required between month and day-of-month.`

Solution: Specify the day and month in a valid format.

`HPS1730T Archive Master key 'delta key' 'archive key' added.`

Explanation: This is a trace (or logging) message.

`HPS1731E Month text must be JAN,FEB,MAR,APR,MAY,JUN,JUL,AUG,SEP, OCT,NOV, or DEC.`

Solution: Specify the month in an allowed format.

`HPS1731T Archive Master key 'archive key' added.`

Explanation: This is a trace (or logging) message.

`HPS1732E Day of the month cannot be zero.`

Solution: Specify a valid day of the month.

HPS1732T Archive Master key 'base key' 'archive key' added.

Explanation:

`HPS1733E Day of the month too large.`

Solution: Specify a valid day of the month.

`HPS1733T 'Archive Master key 'delta key'... 'archive key' not added (duplicate).`

Explanation: Archive Master Key already exists. This is a trace (or logging) message.

`HPS1734E Date and time must be separated by "_"`

Solution: Specify the date/time in the valid format.

`HPS1734W Object 'object' deletion failed.`

Explanation: Object 'object' has been memo-deleted and does not exist.

`HPS1735E Hours, Minutes and Seconds must be separated by ":"`

Solution: Specify the time in a valid format.

`HPS1736E Hours cannot exceed 23, and Minutes or Seconds cannot exceed 59`

Solution: Specify a valid time.

`HPS1737E Level contains non-numeric character.`

Solution: Specify a valid level. (1-99)

`HPS1738E Level must be at least one.`

Solution: Specify a valid level. (1-99)

`HPS1739E Level exceeds maximum of 99999.`

Solution: Specify a valid level. (1-99999).

`HPS1740I Parms in effect 'parm list'`

`HPS1741E Incompatible parms.`

* Program return code = 'return code' *

`HPS1742E (MINLEVEL) is a parameter to the HPSMAINT job which requires the AGE parameter to be specified.`

`HPS1743T Object Master key 'object master key' erased.`

Explanation: This is a trace (or logging) message.

`HPS1744E Age contains non-numeric character`

`* Program return code = 'return code' *`

`HPS1745E Invalid Object Dataset name or pattern.`

Explanation: Data set name or pattern in HPSIN control statement is not valid or contains leading spaces.

Solution: Correct the control statement and re-submit the job.

`HPS1746W Record key does not exist; not deleted.`

Explanation: An attempt was made to delete a record key that does not exist.

`HPS1747W Record does not exist; not deleted.`

Explanation: An attempt was made to delete a record that does not exist.

HPS1800-HPS1899

`HPS1800W * Warning * DSCB1 does not exist for 'dsn'`

`HPS1802W Dsn = 'dsn'`

* Error * Relative TRK nr is too large 'ttr'

Solution: Contact ChangeMan SSM Technical Support.

`HPS1803W Begin TTR not found 'cchhr' member 'cnt'`

'cnt' member name 'member' of dsn 'dsn'

Solution: Contact ChangeMan SSM Technical Support.

`HPS1804W CCHHR 'cchhr' of dsn 'dsn' has an invalid segment length.`

Solution: Contact ChangeMan SSM Technical Support.

`HPS1805W Member-name = 'member' dsn = 'dsn'`

* Error * Relative TRK nr is too large

Solution: Contact ChangeMan SSM Technical Support.

`HPS1807W CCHHR 'cchhr' of dsn : 'dsn'`

has a blk-descriptor 'value' and a blk-length of 'value'

Solution: Contact ChangeMan SSM Technical Support.

`HPS1808W CCHHR 'cchhr' of dsn : 'dsn'`

has an RDW descriptor of 'value'

Solution: Contact ChangeMan SSM Technical Support.

`HPS1810I Dsn is not PS,DA OR PO Dsn='dsn'`

Solution: Correct the error and resubmit.

`HPS1811W No volume list supplied.'dsn'`

Solution: Correct the error and resubmit.

`HPS1813W PDS directory is damaged for dsn 'dsn'`

Solution: Contact ChangeMan SSM Technical Support.

`HPS1814W Obtain error for continuation DSCB in 'dsn'`

Solution: Contact ChangeMan SSM Technical Support.

`HPS1815W ChangeMan SSM will consider member 'member' to be an alias of member 'member' since they share the same ttr 'ttr'`

Solution: Contact ChangeMan SSM Technical Support.

`HPS1816W Not a load library: 'dsn'`

Solution: Correct the error and resubmit.

`HPS1822W No extents in Dsn: 'dsn'`

Solution: Correct the error and resubmit.

`HPS1823I VTOC index files will not be fingerprinted: 'dsn'`

`HPS1824I VVDS files will not be tracked: 'dsn'`

HPS1900-HPS1999

`HPS1900E DD 'DD' is missing.`

Solution: Correct the error and resubmit.

`HPS1901E Open failure on DD 'DD'`

Solution: Correct the error and resubmit.

`HPS1902E 'DDIMPORT is not a VSAM basket data set.'`

Solution: Correct the error and resubmit.

`HPS1903E VSBASKET is damaged. TYPE = 'r15'`

Blk nr = 'nr'

Displacement = 'value'

Record nr = 'nr'

Record len = 'length'

Record type = 'type'

File seq nr = 'seq'

Solution: Contact ChangeMan SSM Technical Suppprt.

`HPS1904W 'rpltype' Failure on 'acbtype'`

file cluster 'cluster'

MACRF = 'acbmacrf'

RPL OPTCD=('rploptcd')

R15 = 'value' R0 = 'value' FDBK = 'code'

Solution: Contact ChangeMan SSM Technical Support.

`HPS1905I Verification Prepass:`

Cluster: 'cluster'

Records Original

Processed Summary in Basket

'cnt' 'cnt' update

'cnt' 'cnt' add

'cnt' 'cnt' delete

'cnt' 'cnt' total

Current status

'cnt' regressed records

'cnt' previously applied

`HPS1905W Verification Prepass:`

Cluster: 'cluster'

Records Original

Processed Summary in Basket

'cnt' 'cnt' update

'cnt' 'cnt' add

'cnt' 'cnt' delete

'cnt' 'cnt' total

Current status

'cnt' regressed records

'cnt' previously applied

Explanation: The file is not healthy.

`HPS1906I 'cluster'`

'simulated'

'cnt' updated

'cnt' added

'cnt' deleted

'cnt' previously applied

`HPS1907W Some regression has occurred. Force not specified.`

Explanation: There is a potential user error of specifying the wrong target cluster.

Solution: Resolve the error and retry the job. Or, specify the parameter REGRESSIONCHECK=N to allow the job to continue provided it is acceptable. Contact ChangeMan SSM Technical Support if you cannot determine the cause.

`HPS1908I Reverse Basket created in 'dsn'`

`HPS1909E Close failure on 'dd'`

Solution: Correct the error and resubmit.

`HPS1910E Close failure on cluster 'cluster'`

Solution: Correct the error and resubmit.

`HPS1911E VSAM record was updated since the base fingerprint.`

Explanation: There is a potential user error of specifying the wrong target cluster.

Solution: Resolve the error and retry the job. Or, specify the parameter REGRESSIONCHECK=N to allow the job to continue if it is acceptable. Contact ChangeMan SSM Technical Support if you cannot determine the cause.

`HPS1912E VSAM record has been added since the base fingerprint.`

Solution: Correct the error and resubmit.

`HPS1913I Apply pass is prevented. Nothing to do.`

Solution: Correct the error and resubmit.

`HPS1914E DDIMPORT is not a VSAM REVERSE basket data set.`

Solution: Correct the error and resubmit.